PCL Media Tray Calls

PCL media type calls can be added to a map with the Use PCL command.

  1. Check the Use PCL check box.
  2. Put a descriptive name in the Tray field. This is the label that will appear in the tray selection menu in the Output Page Definition command; it can be anything you wish.
  3. Use the following string in the PCL field:
    /027&n[LENGTH]Wd[MEDIA TYPE]

The length of the [MEDIA TYPE] string + 1.
(The number of characters after the 'W')

The media type that is configured on the printer/printer driver.




Article is closed for comments.
Powered by Zendesk